Call 866 646 0405

Category: Uncategorized

  • What a Tenant Improvement Allowance Really Covers

    What a Tenant Improvement Allowance Really Covers

    A tenant improvement allowance is one of the most negotiated numbers in a commercial lease, and one of the most misunderstood. Here is what it typically pays for and where tenants get surprised.

    What the allowance usually covers

    Most allowances are meant for permanent improvements to the space: demolition, framing, drywall, ceilings, flooring, standard lighting and power, HVAC distribution, doors, and paint. Storefront and interior glazing tied to the base building scope often qualifies as well.

    What often falls outside it

    Furniture, data cabling, security systems, signage, specialty equipment, and design fees are frequently excluded or capped. So are upgrades above building standard, such as premium glass, switchable partitions, or custom millwork.

    How to protect the number

    Get a real scope and a fixed-price bid before you sign, not a rough per-square-foot guess. A contractor who has priced the actual drawings can tell you whether the allowance covers the work or leaves a gap you will fund out of pocket.

    Working through a lease now? Send us the space plan and we will price it against your allowance.

  • Curtain Wall vs. Window Wall: Which Your Build-Out Needs

    Curtain Wall vs. Window Wall: Which Your Build-Out Needs

    Two systems dominate commercial facades, and tenants building out a new space are often handed drawings without a clear explanation of which one they have. The difference affects cost, schedule, and how the interior meets the glass.

    Curtain wall

    Curtain wall hangs on the outside of the floor slabs as a continuous skin. It spans multiple floors, carries only its own weight, and handles structural and water loads as an engineered assembly. It is the right call for full facades, high performance requirements, and taller elevations.

    Window wall

    Window wall sits between slabs, floor to floor, and is anchored at the top and bottom of each opening. It is lighter, less expensive, and faster to install, which makes it common in mid-rise and tenant-driven re-skins.

    Why it matters for your build-out

    The system dictates sill heights, perimeter detailing, and how partitions and ceilings die into the glass. Getting the interior framing right depends on knowing which system is on the drawings before layout starts.

    Not sure what your space has? Share your elevations and we will walk you through the implications.

  • Storefront Glass Replacement Without Closing Your Doors

    Storefront Glass Replacement Without Closing Your Doors

    Retail and office tenants often assume a failed storefront means days of plywood and lost foot traffic. It does not have to. With the right sequence, most commercial storefront replacements happen in a single overnight or weekend window.

    Measure and order before you demo

    The long pole in any glass job is fabrication, not installation. We field-measure the existing openings, confirm glass make-up and framing finish, and place the order while your doors stay open. Nothing gets removed until the replacement units are on site and inspected.

    Work in the off hours

    Aluminum storefront framing and insulated glass units can be swapped after close and be watertight before you open. For larger elevations we phase the work opening by opening, keeping the entrance and the majority of the glass line intact each day.

    Plan for the inspection

    Safety glazing, egress hardware, and energy-code compliance are the three items that stall a final sign-off. We flag them during the estimate so the permit, the glass specification, and the hardware all line up before the crew mobilizes.

    Planning a storefront replacement? Send us the address and a photo and we will tell you what the window of work looks like.